Advertisement
Quick Links
......................................................
1
What's on your package?
One DIO-96/144 card
One companion ISA CD (V2.1 or later)
One Quick Start Guide(this document)
......................................................
2
Installing Windows Driver
Follow those steps:
1. Setup the Windows driver.
You can get the driver from:
CD:\NAPDOS\ISA\DIO\DLL\
http://ftp.icpdas.com/pub/cd/iocard/isa/napdos/isa/dio/dll/
Language
Version
Update
- 1 -
DIO-96/144
English
V1.2
Nov.2008
Advertisement
Related Manuals for ICP DAS USA DIO-96/144
Summary of Contents for ICP DAS USA DIO-96/144
- Page 1 Language Version V1.2 Update Nov.2008 ……………………………………………… What’s on your package? One DIO-96/144 card One companion ISA CD (V2.1 or later) One Quick Start Guide(this document) ……………………………………………… Installing Windows Driver Follow those steps: 1. Setup the Windows driver. You can get the driver from: CD:\NAPDOS\ISA\DIO\DLL\ http://ftp.icpdas.com/pub/cd/iocard/isa/napdos/isa/dio/dll/...
- Page 2 Windows driver only support windows 98/NT/2000 and XP/2003/vista 32-bit versions. 2. Click button to start installation. 3. Click button to install driver into the default folder. 4. Click button to continue installation. 5. Select “NO, I will restart my computer later” and then click button.
-
Page 3: Adding Hardware
……………………………………………… Installing Hardware on PC Follow those steps: 1. Shut down and power off your computer 2. Remove all covers from the computer 3. Select an empty ISA slot 4. Carefully insert your I/O card into the ISA slot 5. Replace the PC covers 6. - Page 4 7-5 Select the item “No, I want to select the hardware from a list” and click the “Next >” button. 7-6 Select the item “Other device” and click the “Next >” button. 7-7 Click the “Have Disk…” button. 7-8 Click the “Browse…” button to select the Inf file default path is C:\DAQPRO\DIO_Win2K\Inf and click the “OK”...
-
Page 5: Pin Assignments
……………………………………………… Pin Assignments CH0/1/2/3/4/5:50-pin header CH5:The DIO-144 only Pin Description Pin Description All signal are TTL compatible compatible 2.4V ~5.0V (Voltages over 5.0V will High(1) damage the device) None 2.4V~0.8V Defined Under 0.8V Low(0) - 5 -... - Page 6 Self-Test Use CA-5002(Optional) to connect the CH0 with CH1. (DIO-144 only) II. Run the DIO sample program. Get the file from(default path): C:\DAQPro\DIO_WinXXX\Demo\ III. Check number of the DIO-96/144, and test DIO function Please follow those steps: - 6 -...
- Page 7 One DIO-96/144 card had successfully installed to PC Step 1 Select the board number for the DIO-96/144. It starts from 0. Step 2 Select the Ch No. to 1 Step 3 Click this button to output the value Step 4...
- Page 8 ……………………………………………… Additional Information DIO-96/144 Series Card Product page: http://www.icpdas.com/products/DAQ/pc_based/dio_96&144.htm DN-37(Optional) page: http://www.icpdas.com/products/DAQ/screw_terminal/dn_37.htm ADP-37(Optional) page: http://www.icpdas.com/products/DAQ/screw_terminal/adp_xx.htm Documents: CD:\NAPDOS\ISA\DIO\manual CD:\NAPDOS\ISA\Manual http://ftp.icpdas.com/pub/cd/iocard/isa/napdos/isa/DIO/manual/ Software: CD:\ ISA\NAPDOS\ISA\DIO http://www.icpdas.com/download/isa/dio/index.htm The ICP DAS Web Site http://www.icpdas.com Technical support Supplies and ordering information Ways to enhance your device...