Installation Requirements - Wickes AQUATRONIC POWER Product Manual

Thermostatic shower
Table of Contents

Advertisement

Duty Cycle
designed to operate if motor temperatures become too high due to
abnormally high supply voltages. The duty cycle is 15 minutes on/45
minutes off. Under normal operating conditions the thermal trip is
unlikely to be activated.
Noise – The acoustic noise from the pump motor has been reduced
with the use of anti-vibration rubber feet and rubber wall plugs. The
type of wall the Appliance is fixed to will also affect the perceived noise
level; solid walls will provide a quieter operation.
Standards
The Aquatronic Thermostatic Power Shower complies with all relevant
directives for CE marking.

INSTALLATION REQUIREMENTS

Gravity Fed system – The shower MUST be fed from a cold water
cistern and hot water cylinder providing nominally equal pressure.
The motor is fitted with a self-resetting thermal trip,
30°-60°
10m Maximum
80mm Minimum
9

Advertisement

Table of Contents
loading

Table of Contents