Operation - Wickes AQUATRONIC POWER Product Manual

Thermostatic Power Shower
For safety reasons this appliance is fitted with an adjustable
maximum temperature setting. This must be checked and adjusted
as necessary to suit both site conditions and user's comfort.
1. Turn the outer flow control knob
until the desired flow of water
is obtained. The flow of water
will increase the further the
control
anticlockwise.
2. Turn the inner temperature
control anticlockwise for
warmer water and clockwise
for cooler water, the numbers
indicate
temperature:
1 = Cold, 4 = Tepid, 7 = Hot
Warning! Operation of the
override button will allow a
shower temperature above the
preset maximum.
3. To override
maximum temperature press
the override button and turn the
temperature control anticlockwise.
4. Turn the outer flow control knob
fully clockwise to stop the flow
of water.

OPERATION

is turned
the relative
the preset
22
Warmer
Inner
Temperature
Control
Press the override
button and turn the
temperature control
anticlockwise.
Outer Flow
Control
4
Outer Flow
Control
4
Cooler
4
4
Off
Position