Charging From The Charging Port; General Operation; Powering On/Off; Selecting Modes - Sandstrom SANDSP20M Quick Start Manual

Charging from the CHARGING Port

The 5V 1A Charging Port is designed only for charging mobile devices
(e.g. MP3 player, mobile phone, etc). It supplies 5V DC at a charging current
of up to 1000mA (1A).
Use a USB cable (not included) to connect mobile device to the 5V
Charging port of the unit and the mobile device will start charging.
ONLY use the 5V
use this port for any other purpose.

General Operation

Powering ON/OFF

• Press ON/OFF switch to ON position to switch the unit on.
• Press ON/OFF switch to OFF position to switch the unit off.
• Disconnect the mains plug from the mains socket if you want to switch
the unit off completely.

Selecting Modes

Press SOURCE button repeatedly to switch between Bluetooth and Line
in mode.

Adjusting the Volume

Turn the Volume +/– dial clockwise/anticlockwise to increase/decrease the
volume.
1A Charging Port to charge small mobile devices. NEVER
GB
1A
15