Advertisement
Bottom filter
2.1 Overview
Purpose of the UDX series bottom filter
The UDX series bottom filters are exclusively designed for the Barco UDX projectors and can thus not be used
on any other equipment.
The filters has are designed to help protect the LDMs present in UDX projectors, while mounted in
environments with polluted air.
Two types of filters
The UDX projectors have several variants in the field, and thus two types of filter have been designed:
Product number
Description
Kit content
Image of kit content
2.2 Mounting the filter on UDX with rigging frame
Required tools
•
Allen wrench 3 mm
•
Allen wrench 5 mm
•
Allen wrench 6 mm
How to prepare the UDX
1.
Place the UDX with rigging frame upside down.
2.
If the UDX motorization is installed on the rigging frame, temporary release the Skew actuator from the
rigging frame.
Tip: For detailed instructions on the removal and installation of the skew actuator, refer to the
motorization installation manual (R5906146).
Tip: The filter will be mounted partially underneath the skew actuator. If not removed, the
installation will be quite cumbersome.
8
R5914789 /00
UDX Bottom filter
R9802352
Filter for UDX projector with rigging
frame (either with or without
motorization)
Filter holder and three types of filter
pieces (1 piece of each type)
R9802353
Filter for UDX projector without rigging
frame
Filter holder and one filter piece
Advertisement
