Advertisement
Bottom filter
Image 2–3 Placing the filter foam pieces
6.
Place the filter frame on the projector bottom plate as illustrated and drive the previously released screws
back in.
Image 2–4
7.
If the UDX motorization is installed on the rigging frame, mount back the Skew actuator from the rigging
frame.
Tip: For detailed instructions on the removal and installation of the skew actuator, refer to the
motorization installation manual (R5906146).
2.3 Mounting the filter on UDX without rigging
frame
Required tools
Allen wrench 3 mm
10
R5914789 /00
UDX Bottom filter
Advertisement
