COMPONENT MAINTENANCE MANUAL
D.
Timer assembly, PN 11059-79 (refer to IPL Figure 4) as follows:
(1)
Procedures
(a)
If removed during disassembly, install identification decal (75).
(b)
Install grommet (70), sockets (90), plug (85), pins (65), plug (60), clamp (55),
connector (50) and disconnect (45).
(c)
Install PC board (15), using screws (40), terminal lug (35), lock washer (30),
washer (25) and nuts (20).
(d)
Install timer plate (5) in timer enclosure (80) using screws (10).
(2)
Storage Instructions
(a)
List of Materials
NOTE: Equivalent substitutes may be used for listed items.
ITEM
Bag
Barrier Material
(b)
Instructions
If the timer is to be stored after overhaul, seal in a plastic bag, wrap with barrier
material and place in a cardboard carton. Mark part number and date of overhaul
on outside of carton.
Monogram Sanitation
PN 15900-012 Series
DESCRIPTION
Plastic
MIL-B-121
SOURCE
Commercially Available
Any Source
38-31-07
Page 710
Jan 10/95