Monogram 15900-012 Assembly page 45

COMPONENT MAINTENANCE MANUAL
(j) Install clamps (340) with spacers (354), nuts (345 and 347) and washers (350 and 352)
(k) Install drain valve assembly (320) and gasket (335) with nuts (325) and washers (330).
(l) Install pulley bracket (305) with washers (310) and nuts (315).
(m) Install pulleys (255) with cotter pins (245), clevis pin (240 and 260), washers (250) and roll
pin (275).
(n) Install pulley bracket (225) with nuts (230) and washers (235).
(o) Install pulley (205) with cotter pin (215), clevis pin (210) and washer (220).
(p) Install vent fitting (185) and gasket (200) with nuts (190) and washers (195).
(q) If removed during disassembly, install contact pins (140), connectors (145 and 150), adaptor
hose (155) and mounting brackets (160) on solenoid valve (165).
(r) Install solenoid valve assembly (125) with nuts (130) and washers (135).
(s) Install motor-pump-filter assembly (110), secure with washers (120) and nuts (115).
(t) Install fill line hose (100) with clamps (105).
(u) Position bowl gasket (75) on the tank and top assembly.
(v) Install restrictor (70).
(w) Install bowl assembly (55) with washers (65) and nuts (60).
(x) Connect grounding strap (50).
(y) Install flush hose (40) and secure with clamps (45).
(z) If removed at disassembly, replace decal (5).
Monogram Sanitation
PN 15900-012 Series
38-31-07
Page 703
Jan 10/95