Monogram 15900-012 Assembly page 27

COMPONENT MAINTENANCE MANUAL
(16) Remove clamps (340) by removing nuts (345 and 347)) and washer (350 and 352) and
removing spacers (354).
(17) Remove connector bracket (355) by removing nuts (360) and washers (365).
(18) Remove timer connector from bracket (355) by removing screws (370), washers (375)
and nuts (380).
(19) Remove timer assembly (385) and gasket (400) by removing screws (390) and washers
(395). Discard gasket.
(20) Remove timer bracket (405) by removing nuts (410) and washers (415).
(21) Remove ground strap (435) by removing nut (455), washers (445) and (450) and stud
(440).
(22) Remove liquid level transmitter (460) by removing screws (465) and washers (470) and
(475).
(23) Remove gasket (480), mounting plate (485) and O-ring (495) by removing screws
(490). Discard gasket and O-ring.
NOTE: The details of the tank and top assembly (535), items (540) through (575), are set
in potting compound or epoxy and should not be disassembled.
(24) Remove and disassemble seat assembly (510) as follows:
(a) Remove hinge (520) by removing screws (515).
(b) Remove bumpers (525) from seat (530).
(25) Remove O-ring (500) from tank and top assembly (535).
Monogram Sanitation
PN 15900-012 Series
38-31-07
Page 303
Jan 10/95