Monogram 15900-012 Assembly page 26

2. Procedures
A. Toilet Assembly, PN 15900-12 (refer to IPL Figure 1)
(1) If damaged or illegible, remove decal (5).
(2) Remove flush hose (40) by removing clamps (45).
(3) Disconnect grounding strap (50).
(4) Remove bowl assembly (55) by removing nuts (60) and washers (65).
(5) Remove restrictor (70).
(6) Inspect bowl gasket (75), remove and discard if necessary.
(7) Remove fill line hose (100) by removing nuts (115) and washers (120).
(8) Remove motor-pump-filter assembly (110) by removing nuts (115) and washers (120).
(9) Remove solenoid valve assembly (125) by removing nuts (130) and washers
(135).
NOTE:
(10) Remove vent fitting (185) and gasket (200) by removing nuts (190) and washers (195).
(11) Remove pulleys (205) by removing cotter pins (215), clevis pin (210) and washers
(220).
(12) Remove pulley brackets (225) by removing nuts (230) and washers (235).
(13) Remove pulleys (255) by removing cotter pins (245), clevis pins (240 and 260) and
washers (250) and roll pin (275).
(14) Remove pulley brackets (305) by removing nuts (315) and washers (310).
(15) Remove drain valve assembly (320) and gasket (335) by removing nuts (325) and
washers (330).
Monogram Sanitation
COMPONENT MAINTENANCE MANUAL
PN 15900-012 Series
If damaged or defective, contact pins (140), connectors (145 and 150), hose
adaptors (155) and mounting brackets (160) may be removed from solenoid
valve (165).
38-31-07
Page 302
Jan 10/95