7700 MultiFrame Manual
7707OO-2-OC Telecom and Datacom Optical Wavelength Converter
6.3.
V
LINK
CONTROLLED PARAMETERS
ISTA
®
The following parameters can be remotely controlled through the VistaLINK
Parameter
Data Mode
Data Rate
Laser Mode
Optical Threshold
6.4.
V
LINK
TRAPS
ISTA
®
The following traps can be VistaLINK
Parameter
Laser Fault
Input Signal Presence
Optical Power
Page-18
Description
Select telecom or datacom data rates
Select the data rate/standard from available
telecom and datacom types, automatic and bypass
modes
Select continuous or discontinuous laser mode for
LINE and EQUIPMENT side lasers (separate
settings for each)
Optical power threshold for low optical power alarm
trap – separate settings for LINE and EQUIPMENT
receivers
Table 6-2: VistaLINK
®
enabled and monitored.
®
Description
Indicates deficient operation of the optical output
line and/or equipment laser
Indicates missing signals at LINE and/or
EQUIPMENT inputs
Indicates LINE and/or EQUIPMENT optical input
power below threshold setting
Table 6-3: VistaLINK
Revision 1.3
Controlled Parameters
Traps
®
interface.
®