Table of Contents
Advertisement
Saving Your Current Scale Setup
(Scale Memory)
You can use the following procedure to store up to four scale
setups in memory for quick and easy recall whenever you
want to use them.
1.
While holding down the D-5 (STORE) button,
press the SCALE MEMORY number button (D-1
through D-4) to which you want to assign the
current scale setup.
• This will save the current scale setup to the button you
press.
• If there is a setup already assigned to the number key
you press, it will be replaced (deleted) by the new
setup.
Example: To assign the current scale setup to the D-2 (2)
button.
2.
To recall a saved scale setup, press the SCALE
MEMORY number button (D-1 through D-4) to
which it is assigned.
Playing with an Oriental Scale
Specifying whether the Current
Scale Settings Should be Applied
to Auto Accompaniment
(Accomp Scale)
1.
While holding down the R-13 (FUNCTION)
button, press the C-8 (SCALE) button to display
the scale screen.
2.
Use the R-17 (y) button to move the 0 to
"AcmpScale".
3.
Use the dial or the R-14 (–, +) buttons to change
the setting value.
To do this:
Not apply scale settings to Auto
Accompaniment
Apply scale settings to Auto
Accompaniment
4.
When the setting is the way you want, press the
R-15 (EXIT) button.
• This will return to the screen that was displayed before
you displayed the scale screen.
• The above scale on/off setting affects all of the Auto
Accompaniment chord parts (Chord 1 through Chord 5) and
bass parts (A11 through A16). You also can turn scales
settings on or off for each individual part using the Part
Parameter (page E-43) "Scale (Part Scale Enable)" setting.
Select this setting:
oFF
on
E-25
Advertisement
Table of Contents
