Casio AT-5 User Manual page 50

Using the Tone Editor
Parameter Name
DSP Parameters 1
through 8
DSP RevSend
(DSP Reverb Send)
Mod Setting
(Modulation Setting)
Mod Depth
(Modulation Depth)
*3
Mod Button Assign
(Modulation Button
Assign)
*3
Mod Button On Value
(Modulation Button On
Value)
*3
Mod Button Off Value
(Modulation Button Off
Value)
*1 See "Preset DSP List" (page E-150) for information about the DSP types of each preset DSP.
*2 The number of DSP parameters, their content, and their setting ranges depend on the DSP type. For details, see "DSP Type
List" (page E-151) and "DSP Parameter List" (page E-152).
*3 Included in the "Mod Button" group. To change the settings of these parameters, move the 0 to "Mod Button" and then press
the R-16 (ENTER) button. Next, use the R-17 (t, y) buttons to move the 0 to the parameter whose setting you want to
change.
*4 Setting range depends on the selected DSP type.
*5 Depends on the selected DSP type and the "Mod Button Assign" setting.
E-48
Shows up to eight parameters for "DSP Type".
Adjusts how much reverb is applied to the post-DSP note.
Assigns either vibrato or DSP to the S-2 (MODULATION) button.
When vibrato is assigned to the S-2 (MODULATION) button, specifies the
depth of vibrato applied to a tone while the button is depressed.
Specifies the function assigned to the S-2 (MODULATION) button when "DSP"
is selected for the "Mod Setting". Specifying a value from 1 through 8 assigns
the corresponding DSP parameter (1 through 8). Nothing is assigned to the
button when "oFF" is selected for this parameter.
Specifies how the function currently assigned to the S-2 (MODULATION)
button works while the button is depressed.
Specifies how the function currently assigned to the S-2 (MODULATION)
button works while the button is released.
Description
*2
Setting Range
*2
*
0 to 40 to 127
*
Vib , DSP
0 to 127 (Default
setting depends on
the tone.)
* *4
oFF , 1 to 8
*5
*5