Casio AT-5 User Manual page 106

Using the Pattern Sequencer
8.
Repeat steps 4 through 7 for all of the parts you
want to edit.
• It is recommended that you save the rhythm as a user
rhythm each time you finish editing each
accompaniment pattern. For details about how to do
this, see "To store an edited or newly created rhythm"
(page E-106).
9.
Repeat steps 3 through 8 to edit all of the
rhythm's accompaniment patterns you want.
10.
After completing all of the editing you want,
adjust the tempo of the rhythm as desired.
• The tempo you set here becomes the initial default
tempo of the accompaniment pattern.
11.
For details about how to save the final version
of the rhythm as a user rhythm, see "To store
an edited or newly created rhythm" (page
E-106).
To create a new accompaniment pattern
1.
Press the C-4 (PATTERN SEQUENCER) button.
• This displays the pattern sequencer screen. For details
about screen contents, see step 2 under "To rehearse
before editing an existing rhythm" (page E-99).
2.
Perform the procedure under "To clear all
instrument part rec areas included in an
accompaniment pattern" (page E-115).
• Select the accompaniment pattern you want to record
anew and then perform the clear operation.
3.
Perform the procedure under "To configure
pattern rec settings (Rec Menu)" (page E-101).
• This step is not necessary if you want to perform
operations using initial default settings or if you want to
use previous settings without changing them.
E-104
4.
Configure the accompaniment pattern number
of measure and beat settings.
(1) While holding down the R-13 (FUNCTION) button,
press the C-4 (EDIT) button to display the edit menu.
(2) Use the R-17 (t, y) buttons to move the 0 to
"ElementEdit" and then press the R-16 (ENTER)
button.
• This displays the "ElementEdit" screen.
(3) Use the R-17 (t, y) buttons to select one of the
items described in the table below and then use the
dial or R-14 (–, +) buttons to change the setting.
Display: Item name
Measure: Number of INTRO, ENDING: 01 to 16
measures NORMAL, VARIATION: 01 to 16
NORMAL FILL-IN, VARIATION
FILL-IN: 01 to 02
Beat: Beat 2/4 to 4/4 to 8/4, 2/8 to 16/8
(4) Press the R-15 (EXIT) button twice to exit the edit
menu.
5.
Use the R-17 (u, i) buttons to select the
instrument part you want to record.
Currently selected accompaniment pattern
Currently selected instrument part status (page E-97)
Setting Range
Currently selected instrument part