Saving Keyboard Setups To Registration Memory; To Save A Setup To Registration Memory - Casio CT-X700 User Manual

Saving Keyboard Setups to
Registration Memory
Registration memory lets you store Digital Keyboard setups
(tone, rhythm, etc.) for instant recall whenever you need them.
When recalling registration data, you can specify items that
you do not want to include in the recall (Freeze).
Registration memory simplifies performance of complex
pieces that require successive tone and rhythm changes.
You can have up to 32 setups in Registration memory at one
time. bs BANK and bt 1 to cm 4 are used for recording.
bs bt
Area 1
Bank 1 Setup 1-1
Bank 2 Setup 2-1
. .
. .
Bank 8 Setup 8-1
• Each press of bank select button bs BANK cycles through
the bank numbers, from 1 to 8.
• Pressing a button from bt 1 to cm 4 selects the
corresponding area in the currently selected bank.
■ Registration Memory Data
• Tone numbers (main, layer, split)
• Rhythm number
• Tempo
• Auto Harmonize (on, off, type)
• Transpose
• Split point
• Touch Response
• Octave shift
• Chord fingerings
• Accompaniment volume
• Arpeggiator setting (on, off, type)
• Synchro start
• Reverb (on, off, type)
• Chorus (on, off, type)
• Accomp (on, off)
• Arpeggiator hold (on, off)
• Layer (on, off)
• Split (on, off)
• Pedal effect
• Preset Scales
EN-34
ck cl cm
Area 2 Area 3
Setup 1-2 Setup 1-3 Setup 1-4
Setup 2-2 Setup 2-3 Setup 2-4
. .
. .
Setup 8-2 Setup 8-3 Setup 8-4
To save a setup to registration
memory
1.
Press bm RHYTHM.
2.
Configure the tone, rhythm, and other settings
you can to include in the setup.
3.
Press bs BANK to select the bank you want.
Each press of bs BANK cycles through the bank
numbers.
• You also can select a bank using the ct number keys,
and the dk [–] and [+] keys within three seconds after
Area 4
pressing the bs BANK button.
4.
While holding down cn STORE, press a button
from bt 1 to cm 4 to select an area.
.
This will save the settings you configured in step 2 into
.
the applicable setup.
• If there is anything already stored in the setup, it will be
replaced (deleted) by the new setup.
Bank number
Bank 4
Stored in Setup 4-1
S t o r e