Casio AT-5 User Manual page 111

Event Editor Screen Contents
The event editor screen shows the individual events recorded
to an instrument part as shown in the sample screen below.
Event being edited (selected event)
• The event editor screen shows three events at one time.
The event in the middle line is the selected event. You can
change the value where the solid-line cursor is located. A
broken line under a setting value indicates that the cursor
can be moved to that value.
• The values in the format "001:01:00" at the beginning of the
event indicate the recording location (timing) of the event as
measure:beat:tick. A "tick" is a time unit that is shorter than
one beat. Pattern sequencer data uses 96 ticks per beat
(for 2/4 to 8/4) or 48 ticks per beat (for 2/8 to 16/8).
Pattern sequencer records three types of events: notes
(keyboard play), pitch bender operations, and modulation
operations. These events are represented on the screen as
described below.
● Notes
The note name is indicated to the right of the event location
information, followed by the gate time (note length), and
velocity (note speed) parameters.
the parameter name where the cursor is currently located.
Note name (NOTE)
B
Cursor
Events before (previous event) and after
(following event) the current event
1 shows an abbreviation of
1
Velocity (VEL)
Gate time (GATE)
Using the Pattern Sequencer
● Pitch bender, modulation
"Bend" (pitch bender even) or "Mod" (modulation event) is
indicated to the right of the event location information,
followed by parameter value. "VALU" is displayed at
the cursor is located at a parameter value.
Event name (Bend or Mod)
■ Settings
Event Parameters
Note name
Note Gate time
Velocity
Pitch Bender Pitch Bender
Modulation Modulation
* When "C-" is displayed, it indicates C-1 (one octave below
C0).
1 when
1
Parameter value (VALU)
Setting Range
*
C- to C0 to G9
00:00 to 99:95
001 to 127
–8192 to 0000 to +8191
000 to 127
E-109