Casio AT-5 User Manual page 129

ArpegSpeed (Arpeggiator Speed)
Specifies how many times notes or chords should sound
within one beat for arpeggio phrases played by the
arpeggiator (page E-21).
*
1, 2, 2S, 3, 4 , 4S, 6, 8
The setting value indicates the number of times within one
beat. Selecting an option that is only a value will sound the
note that number of times within one beat. Selecting "4", for
example, will play with the rhythm 7777.
Selecting an option that includes the letter "S" will play a
2 6
shuffle. 2S plays and 4S plays
• The availability of the settings for this item depends on the
arpeggiator type. Refer to the separate "Appendix" for
details.
ArpegPart (Arpeggiator Part)
Specifies whether arpeggiator play should be used for the
UPPER part keyboard or LOWER part keyboard when the
arpeggiator (page E-21) is used while the keyboard is split
between two tones (page E-15).
*
Upp : UPPER part
Low : LOWER part
RegFltAcmp (Registration Filter: Accompaniment)
Specifies if accompaniment settings are recalled (oFF
a registration setup (page E-61) is recalled, or if
accompaniment settings are not recalled (on).
RegFltScal (Registration Filter: Scale)
Specifies if scale settings are recalled (oFF) when a
registration setup (page E-61) is recalled, or if scale settings
*
are not recalled (on ).
6767
.
*
) when
Play/CardUtl (Playback, Card Utility) Group
• You can directly display this group screen without going
through the function menu. While in the card mode (page
E-132), hold down the R-13 (FUNCTION) button as you
press the C-17 (MENU) button.
PreCount (Song Pre-count Sound)
Specifies if a pre-count should sound (on) when playback of a
song file is started in the card mode (page E-132) or if a
pre-count should not sound (oFF
SongRepeat (Song Repeat Play)
Specifies if a single song file should be repeat played (on)
during playback in the card mode (page E-132) or if a song file
should not be repeat played (oFF
AllData (All Data)
You can batch save all user data in Digital Keyboard memory
to a memory card, or load all user data from a memory card to
Digital Keyboard memory.
See "To batch save all Digital Keyboard data to a memory
card" (page E-134) and "To batch load all Digital Keyboard
memory data from a memory card" (page E-135) for more
information.
CardFormat (Card Format)
See "Formatting a Memory Card" (page E-132).
FileDelete (File Delete)
See "To delete a file from a memory card" (page E-136).
FileRename (File Rename)
See "To rename a file on a memory card" (page E-136).
Using the Function Menu
*
).
*
).
E-127