2ED4820-EM EB2 2HSV48
Table of contents
2.1.2
Flashing the XMC2Go
Once the Config Wizard for 2ED4820 EB software is installed on the PC, the XMC2Go can be connected to the
PC thanks to a micro USB cable. To ensure consistency with the Config Wizard for 2ED4820 EB software
running on the PC, it is necessary to flash the firmware of the XMC microcontroller.
1
step: launch the Config Wizard for 2ED4820 EB software on the PC, from the Infineon Developer Center:
st
Figure 18
Launching the program.
The window shown in the next figure should pop-up on your PC:
Figure 19
Welcome page.
User Manual
www.infineon.com
page 14 of 26
1.0
2022-01-20