Infineon 2ED4820-EM EB2 2HSV48 User Manual page 13

2ED4820-EM EB2 2HSV48
Table of contents
2 Software user manual
In order to interact with the SPI interface of the 2ED4820-EM, an XMC2Go daughter board is assembled on top
of the EB2 2HSV48 board. A firmware has been developed for the XMC MCU to drive the 2ED4820-EM over SPI.
To enable easy testing, a Graphical User Interface has also been developed, which runs on a PC and interacts
with the XMC2Go daughter board by sending/receiving messages over USB: Config Wizard for 2ED4820 EB.
2.1 Prerequiresites
2.1.1 Installing the Config Wizard for 2ED4820 EB
For your PC to interact with the XMC2Go over USB, install the Infineon Developer Center launcher
from this link: Infineon Developer Center
Figure 16 Installing the Infineon Developper Center.
Follow Step 1 + Step 2 to install the launcher.
In Step 3, search for the Config Wizard for 2ED4820 EB in the "Tools" menu, download and install it (Step 4):
Figure 17 Installing the Config Wizard for 2ED4820 EB.
User Manual
www.infineon.com
Launcher, using a web browser:
page 13 of 26
1.0
2022-01-20