Infineon 2ED4820-EM EB2 2HSV48 User Manual page 5

2ED4820-EM EB2 2HSV48
Introduction to the 2ED4820-EM EB2 2HSV48
1.3 Mandatory jumpers
The 2ED4820-EM EB2 2HSV48 comes with two jumpers: J4 for supply selection and J17 for GND connection.
Both jumpers have to be kept on the board for proper operation:
Figure 4 Mandatory jumpers.
1.4 Configuring the current sense position
1.4.1 Low side current sense:
This configuration is used to sense the current thanks to a low ohmic shunt connected to the ground node:
Figure 5 Configuration for low side current sense.
User Manual
www.infineon.com page 5 of 26
1.0
2022-01-20