Table of Contents
Advertisement
7.
Set the filling pattern parameters for QR Code.
• Filling pattern:
• Filling width per module [mm]:
• Filling height per module [mm]:
8.
If you do not mark the human readable text, set as
follows:
• Human readable text:
9.
Confirm that the QR code is displayed
in the marking image editor.
10.
If required, change the parameters in the 2D code object settings and laser settings.
Refer to "2-2 Create a marking file (offline mode)" (P.23).
11.
Perform the test marking.
Refer to "2-8 Start laser radiation for marking" (P.32).
Horizontal line
0.500
7
0.500
OFF
8
ME-NAVIS2-QR-1
43
Advertisement
Table of Contents
