Set Laser Parameters - Panasonic NAVI smart Quick Reference

2-2-3 Set laser parameters

Specify laser parameters that apply to all objects in the marking file, such as laser power and scan speed.
1.
Open the "Laser settings" tab.
2.
Specify the value for "Laser power".
Laser power: 30.0
For test marking, it is recommended to set a lower
laser power value. Check the marking quality and
adjust the parameters gradually until the marking
result meets your expectations.
3.
Specify the value for "Scan speed [mm/s]".
Scan speed [mm/s]: 300
Higher scan speed reduces the marking time and the
thermal effect on the workpiece.
2
3
ME-NAVIS2-QR-1
1
25