2-8-2 Turn laser pumping on
Turn laser pumping on to enable the lasing process.
1.
Select the "Laser pumping" tool in the ribbon.
2.
In the confirmation dialog, select "Yes" to start laser pumping.
A certain amount of time is required to complete laser pumping for the
different laser marking systems:
• LP-GS: approx. 8-15s
• LP-RC: approx. 10s
• LP-RF: approx. 7s
• LP-RV: approx. 1s
3.
After a few seconds, laser pumping is completed and the status icon of
the "Laser pumping" tool changes.
34
ME-NAVIS2-QR-1