Monitor" Screen - Panasonic NAVI smart Quick Reference

1-3 "Monitor" screen

In this screen, you can monitor the operation status of the laser marking system during remote mode or RUN mode.
You can do the following:
• Check the marking image.
• Check the marking settings.
• Check the ON or OFF status of I/O terminals.
„ User interface overview
1
2
3
Item
1 Ribbon - setting tools
2 File number and file
name
3 Marking image editor
4 Ribbon - control tools
5 Marking settings
• Current settings
• On-the-fly
• Reference character
strings
Description
You can use the tools to open a marking file or show the I/O monitor.
The number and name of the selecting file are displayed in the tab.
The image of marking data such as characters and graphics is displayed in this area.
Refer to "Marking image editor" (P.10).
You can use the tools to control the laser marking system in online mode.
You can check the marking data in the following tabs:
: You can check some of the marking parameters that are enabled in "System settings"
> "Access permissions" in advance.
: You can check the status of on-the-fly marking ("ON"/"OFF") and the line speed.
: The specified reference character strings are listed.
ME-NAVIS2-QR-1
4
5
11