Lan - Devolo Giga Bridge Manual

4.3.2LAN

You make changes to the ethernet network set-
tings in the LAN area.
IPv4 Configuration
In the factory default condition, only the DHCP en-
abled option for IPv4 is activated. This means that
the IPv4 address is retrieved automatically from a
DHCP server. The currently assigned network data
is visible (greyed out).
If a DHCP server is already present for the assign-
ment of IP addresses in the network (e.g. your In-
ternet router), you should have the DHCP enabled
option activated for
devolo Giga Bridge adapter automatically receives
an address.
If you would like to assign a static IP address, make
the corresponding entries for the Address, Subnet
mask, Default gateway and Name server fields.
IPv4 so that the
Confirm your settings by clicking the Disk icon.
Keep in mind that all settings that have al-
ready been made will be lost!
Then, restart the devolo Giga Bridge adapter so
that your changes take effect.
Configuration 40
devolo Giga Bridge