Devolo Giga Bridge Manual page 19

19 Introduction
G.hn
LED
3 Red LED
4 White
LED
devolo Giga Bridge
Flashing behav- Meaning
iour
Lights up steady Status 1:
The other network nodes are in standby
mode and cannot currently be accessed
over the mains supply. The LEDs of the
other devolo Giga Bridge adapters flash
white only for a short time.
Status 2:
The connection to the other network
nodes has been interrupted. The remote
station may have been removed or
there is a malfunction in the connection.
Status 1: Status 1:
Flashes at inter- This devolo Giga Bridge adapter is in
vals of 0.5 second pairing mode and the system is search-
(On/off) ing for new devolo Giga Bridge adapt-
ers.
Status 2:
Flashes at inter- Status 2:
vals of 1 second Someone triggered the "Identify device"
(on/off) function on the web interface. This func-
tion identifies the devolo Giga Bridge
adapter being sought.
LED status display
(web interface*)
Can be disabled
Cannot be disabled