Devolo Giga Bridge Manual page 28

Connect the second
1
adapter to a free power socket next to the
router.
Connect the devolo Giga Bridge adapter using
2
the provided network cable to the WAN (Wide
Area Network) port of the router.
Connect the adapter of the devolo Giga Bridge
3
over the telephone line (G.hn phone line
socket, phone) to a connection already availa-
ble in the wall.
Set-up of the devolo Giga Bridge is com-
pleted. The fibre-optic Internet connection
is forwarded from the ONT to the router.
devolo Giga Bridge
An TAE socket and a conventional tele-
phone cable are sufficient to connect the
devolo Giga Bridge to the NT/ONT. The TAE
connector uses the pins 1/2 so that the SISO
mode of the Giga Bridge is used.
devolo Giga Bridge
Initial use 28