Vicon AurorA2000 AUR-VID-PCB Instruction Manual

Added channel option board

Hide thumbs Also See for AurorA2000 AUR-VID-PCB:

Table of Contents

Download this manual

Warning: To reduce a risk of fire or electric shock, do not

expose this product to rain or moisture.

Vicon Industries Inc. does not warrant that the functions contained in this

equipment will meet your requirements or that the operation will be entirely

error free or perform precisely as described in the documentation. This

system has not been designed to be used in life-critical situations and

must not be used for this purpose.

Product specifications subject to change without notice.

Vicon and its logo are registered trademarks of Vicon Industries Inc.

VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788

TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116

24-Hour Technical Support: 800-34-VICON (800-348-4266)

UK: 44/(0) 1489-566300 INFOFAX: 800-287-1207 WEB: www.vicon-cctv.com

Vicon Part No. 8009-8040-15-02

AUR-VID-PCB Added

Channel Option Board

XX040

Rev 701 Section 5

Table of Contents

Need help?

Do you have a question about the AurorA2000 AUR-VID-PCB and is the answer not in the manual?

Page 1 Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture. Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or perform precisely as described in the documentation.
Page 2 A2K-VID-PCB Added Channel Board Warning: Do not connect the unit to a power source until installation is complete. Read all safety instructions in Instruction Manual XX040 before performing this procedure. To guard against damage to the board and additional chip, do not remove them from their electrostatic discharge protective bags until directed to do so.
Page 3 9. Referring to the figure and using the ribbon cable, attach the board connected to J9 to P4 on the AurorA2000 main board. If applicable, use the second ribbon cable to attach the board connected to J4 to P3 on the AurorA2000 main board. 10.
Page 4 Vicon Industries Inc. Offices U.S. Offices Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-CCTV (2288) 800-645-9116 Fax: 631-951-CCTV (2288) Infofax: 800-287-1207 Vicon Industries Ltd. Brunel Way Fareham, PO15 5TX United Kingdom 44/(0) 1489/566300 Fax: 44/(0) 1489/566322 Brussels Office...

Aurora2000 a2k-vid-pcb