Remove The Power Management Module From The Tray; Retract Sliding Bracket At The Back Of The Tray (Front Of The Cabinet) - IBM Cluster 1350 Installation And Service

Figure 19. Retract sliding bracket at the back of the tray (front of the cabinet)
3. Tighten one screw on each side of the sliding bracket to prevent the bracket
4. Remove the mounting screws from the rear vertical cabinet rails
5. Slide the tray out the rear of the cabinet

Remove the Power Management Module from the tray

1. Unplug the power cables from the power "bricks" that lie on the tray behind
112
Installation and Service
from extending as you slide the tray from the cabinet
the Power Management Module