Related Topics; Mount Power Bricks Onto Power Management - IBM Cluster 1350 Installation And Service

Figure 24. Mount power bricks onto Power Management Module tray
2. Mount the brace over the power bricks, as shown in Figure 21 on page 114.

Related topics

Additional product information: use the country selector for your locale or language
http://www.apcc.com/template/country_selection.cfm
The online search engine for APC documentation is available at:
http://sturgeon.apcc.com/techref.nsf/umanuals?openform
Use AP 9212 as a search parameter. Relevant documents include:
v MasterSwitch Power Distribution Unit Installation and Quick Start Manual
(English/French/Spanish/Japanese/German)
v MasterSwitch User's Guide (English)
The online search engine for a variety APC technical questions including troubleshooting is available at:
http://www.apcc.com/support/index.cfm
118
Installation and Service
Mount it so that one end fits under the notch in the tray and one end fits over
a screw hole. Install and tighten the screw to secure the brace.