Chapter 7. Project Files; Standard Project Files; Initialisation Code (Resetprg.c / Resetprg.h) - Renesas M16C/26A Tutorial

M16c family / m16c/tiny series 16-bit single-chip microcomputer

Table of Contents

Chapter 7. Project Files

The Renesas Starter Kit tutorials are configured so that it is possible to provide the same tutorial code on multiple Renesas Starter Kit

products. This allows the evaluation of the different processor cores using equivalent code. To achieve this, the following files are common

between all device cores and Tool-chains.

Each of the tutorial files has detailed comment text describing the function of each code entry. Please refer to the source code for greater

detail on the purpose and operation of the compiler specific details.

This is the entry point of the main tutorial code.

Initialisation of the variables used in the C compilers and initialisation of stack pointers are completed in the ncrt0.a30 file for the M16C

compiler, this file in turn calls Initialise();

The call to HardwareSetup() will initialise the device hardware and peripherals ready for the tutorial software.

The call to main() will start the main demonstration code.

Table of Contents