Table of Contents
Advertisement
Testing the ES8105/ES8105F
10. Power on the host PC, activate the Command Line mode, and ping the connected Ethernet device by typing the ping
192.168.11.102 –t command to see if it will respond. The PC host IP address must be in the same subnet address as
the target device: 192.168.11.102. The parameter -t allows you to continually ping the network device, as shown in the
figure below.
12 - RocketLinx ES8105/ES8105F User Guide: 2000558 Rev. B
Testing the ES8105/ES8105F
Advertisement
Table of Contents
