Table of Contents
Advertisement
When the Almanac update is complete the GPS LED will turn from red to
green. If it does not, make sure that the Sky Echo has a clear view of the
sky and is not overshadowed by tall buildings. An airfield is an ideal
location for the first fix, but allow enough time. Subsequent fixes will be
achieved in minutes.
10 Firmware Update Procedure
10.1 Configuration Setup
Configuration of the SkyEcho is accomplished by logging on to the device
directly from a computer or mobile device using the SkyEcho internal Wi-Fi
hotspot. No additional application is necessary.
The following are procedures for updating the SkyEcho firmware. You may
be provided with one or two files to update, corresponding to the
procedures below. The most recent firmware is always posted at
www.uavionix.com/support.
•
Save the provided firmware file(s) to an accessible location on your
computer/tablet prior to joining the SkyEcho Wi-Fi hotspot.
10.1.1 Connecting to the SkyEcho via Wi-Fi
1. To connect to the SkyEcho, power on SkyEcho and join a device to the
wireless network SSID named SKYECHO-XXXX using the procedure for
your device. This procedure is identical to joining any other public or
private Wi-Fi on your chosen device.
2.
The No Internet Connection
message is normal when connected to
SkyEcho.
3. Open any browser on your computer/mobile device that is connected to
your SkyEcho via the Wi-Fi link and type in 192.168.4.1
The following landing page should load:
UAV-1002156-001
ECCN 7A994
Page
30 | 35
REV M
Advertisement
Table of Contents
