Table of Contents
Advertisement
2. Care should be taken to make sure all devices are secure and will not
interfere with pilot visibility, mobility, or aircraft operation.
3.
8.3 Installation Setup
Configuration of the SkyEcho is accomplished by logging on to the device
directly from a computer or mobile device using the SkyEcho internal Wi-Fi
hotspot. No additional application is necessary.
8.3.1 Connecting to the SkyEcho2 via Wi-Fi
1. To connect to the SkyEcho, power on SkyEcho and join a device to
the wireless network SSID named SKYECHO-XXXX using the
procedure for your device. This procedure is identical to joining any
other public or private Wi-Fi on your chosen device.
2.
The No Internet Connection
SkyEcho.
3. Open any browser on your computer/mobile device that is connected
to your SkyEcho via the Wi-Fi link and type in 192.168.4.1
The following landing page should load, depicting the SkyEcho status.
Note the version numbers, SSID, and Current Status items may differ from
the illustration.
UAV-1002156-001
ECCN 7A994
REV M
message is normal when connected to
Page
18 | 35
Advertisement
Table of Contents
