Vfr Squawk - uAvionix SkyEcho Installation And Pilot's Manual

Hide thumbs Also See for SkyEcho:
Table of Contents

Advertisement

UAV
Space
Surface Vehicle - Emergency
Surface Vehicle - Service
Point Obstacle
Cluster Obstacle
Line Obstacle

8.3.9 VFR Squawk

The SkyEcho transmits a default squawk code. Enter the standard VFR
squawk for your location.
Whilst the SkyEcho transmits a squawk code, note that this is in a different
Downlink Format from your aircraft transponder and will be recognized by
ATC as originating from an EC device; it cannot be interrogated.
Enter the standard VFR squawk code for your country in the SkyEcho 2
setup page. Set squawks as instructed by ATC on your aircraft's
transponder during flight.
There is no need to alter the squawk set in your SkyEcho which can
remain on the VFR squawk. Note: You should not access setup pages
in flight.
UAV-1002156-001
ECCN 7A994
REV M
category unless they meet US 14
CFR Section 103.1.
Any unmanned aerial vehicle or
unmanned aircraft system
regardless of weight
Any spacecraft or trans-
atmospheric vehicle.
Any ground vehicle in operation at
an airport providing emergency
services.
Any ground vehicle in operation at
an airport NOT providing
emergency services.
Point obstacle including tethered
balloons.
Cluster obstacle.
Line obstacle.
Page
24 | 35

Advertisement

Table of Contents
loading

Table of Contents