Configurable Options; See And Avoid; Approvals; Usage Outside Of Approved Locations - uAvionix SkyEcho Installation And Pilot's Manual

Hide thumbs Also See for SkyEcho:
Table of Contents

Advertisement

7.1.6 Configurable Options

Accessing or altering configurable options not intended to be operated
during flight by the pilot in command, as this may cause pilot distraction.

7.1.7 See and Avoid

The SkyEcho is intended to enhance the pilot's ability to 'see and avoid'.
Maneuvers to regain adequate separation should not be based on alerts
issued by this device or connected applications alone.

7.1.8 Approvals

Approvals do not cover adaptations to the aircraft necessary to
accommodate ancillary equipment such as power provisions, mounting
devices or external antennas, such items must still be approved under
existing minor modification/change processes applicable to the aircraft.
Warning: This transceiver is to be used to improve pilot situational
awareness only and as a navigational aid. It is not intended for use in IFR
flight conditions. uAvionix is not responsible for the transceiver's end use
and will not be held liable for any events occurring from its use or misuse.

7.1.9 Usage Outside of Approved Locations

Transmit functionality is currently approved for use only in limited locations
as evidenced by the presence of a country-specific addendum to the
Installation and Pilot's Guide. If flying outside these locations, configure the
device for receive functionality only or consult your local regulator for
approval.
UAV-1002156-001
ECCN 7A994
Page
16 | 35
REV M

Advertisement

Table of Contents
loading

Table of Contents