Table of Contents
Advertisement
5.1 International environments
5.1.1 Country Specific Addendums
EC devices are not approved for transmitting globally. At the time of
publishing this revision, portable ADS-B OUT transmitters are permitted
only in the UK, Australia, and New Zealand. Each approved country has
an addendum to this Installation and Pilot's Guide which discusses local
regulations. Please refer to the applicable addendum for country-specific
instructions and limitations.
If operating SkyEcho outside of an approved location, the transmit function
must be disabled using the configuration settings. SkyEcho can be used
as a receiver globally.
5.1.2 United States of America
At the time of publishing of this revision, SkyEcho is not approved for use
within the United States of America by either the Federal Communications
Commission (FCC) or Federal Aviation Administration.
5.2 Features
The SkyEcho performs the following functions:
• 1090ES ADS-B 1090MHz reception
o Receives ADS-B IN data from aircraft equipped with 1090 MHz
Extended Squitter transmitters.
• 978MHz UAT reception (Selectable Option)
o Receives ADS-B IN data from aircraft equipped with 978 MHz
UAT transmitters. Receives Flight Information Services -
Broadcast (FIS-B) and Traffic Information Services - Broadcast
(TIS-B) compliant with UAT where available.
• FLARM® Receiver (Selectable Option)
o Customers on the European Continent with participating
Electronic Flight Bag (EFB) applications, have the option to
choose FLARM reception capability. With this feature, the EFB
UAV-1002156-001
ECCN 7A994
REV M
Page
10 | 35
Advertisement
Table of Contents
