Modifications And Use Outside Of Intended Scope; Important Pilot Advisory Note Regarding Safety Of Radio Frequency Energy; Proximity To Other Equipment; Altimeter Cross Check - uAvionix SkyEcho Installation And Pilot's Manual

Hide thumbs Also See for SkyEcho:

Table of Contents

7.1.1 Modifications and use outside of intended scope

This device has been designed and tested to conform to all applicable

standards in the original form and when configured with the components

shipped with the device. It is not permissible to modify the device, use the

device for any use outside of the intended scope, or use the device with

any antenna other than the one shipped with the device.

7.1.2 Important Pilot Advisory Note Regarding Safety of Radio

Frequency Energy

Safe use of this device requires care as to the placement of the internal

antenna. Place the antenna at least 4cm away from any part of your body

or that of other cabin occupants. To stop all RF emissions, remove power

from the equipment or configure the equipment for receive mode only.

Retain these instructions with your maintenance logs/files and for future

reference.

Mount the SkyEcho so that it does not compromise the operation of any

other proximate communication or navigation antenna or system. It may be

possible to hear transmissions through installed audio equipment, such as

headsets.

The altitude reported by the EFB must be cross-checked against the

aircraft's altimeter during pre-flight.

It is the responsibility of the pilot to ensure that the transceiver causes no

harmful interference to other onboard equipment and systems.

UAV-1002156-001

ECCN 7A994

Page

15 | 35

REV M

Table of Contents