Table of Contents
Advertisement
Thermo Scientific Laboratory Refrigerators and Freezers
•
Remove contents of unit. If practical, wrap contents in paper and then
in a heavy blanket to maintain temperature of items, especially those
removed from a freezer. Wear protective gloves to prevent frost bite
when handling cold items.
•
Open door and allow free circulation of ambient air.
•
To speed the process, place pan of warm water inside the chamber.
•
Wipe out the interior.
•
Replace contents.
•
Reconnect power cord to outlet and set temperature control to desired
operating temperature.
CAUTION: Do not use any sharp instrument, blade or scraper to remove
ice and frost on refrigerator surfaces because of the very real danger of
puncturing the cooling coil.
CAUTION: Do not use any electrical device to defrost the unit.
When frost accumulates to 1/4" or more, the operating efficiency of the unit
will be affected.
Note For 12LCEETSA, collect the drain water into the drip pan as shown in
Figure 4.
Figure 4. Model 12LCEETSA Illustrating drip pan position
Maintenance
Installation and Operation Manual
27
Advertisement
Table of Contents
