Table of Contents
Advertisement
Unpacking and Installation
18
Installation and Operation Manual
•
Place a small amount of sealing compound granules, enclosed, into a
clean mixing vessel. Add small amounts of water while stirring until a
thick paste is formed, then carefully continue adding smaller amounts of
water until a thick gravy consistency is achieved—NOT WATERY.
Discard any material that becomes too stiff to use. Never attempt to
restore workability by stirring in more water.
•
Locate silver Killark box, back/top-center of unit.
•
Unscrew conduit domed-cover.
Figure 2. Sealing the Killark Box
Figure 3. Horizontal Conduit, Cutaway
Thermo Scientific Laboratary Referigerators and Freezers
Advertisement
Table of Contents
