5 Maintenance and Repair
Driving wheels
Wheel hubs
66
•
During initial startup and after each wheel
change, check and tighten the wheel bolts
or wheel nuts after the first 2 operating
hours and then during each service work
and after every 50 operating hours with
100 Nm.
•
Check the tyre pressure of the wheels fre-
quently. For smooth driving ensure that the
tyre pressure in both wheels is the same.
Never exceed the maximum tyre pressure!
The max. tyre pressure is shown on the side
of the tyre.
cessive tyre pressure.
Only skilled specialists are allowed to repair and
change tyres, using suitable installation tools.
•
Tighten the hexagonal nuts (A/26) for the
wheel hubs at both sides with 250 Nm after
every 50 operating hours.
Hydrostatic Implement Carrier agria 5900 Bison
There is a risk of explosion from ex-