Gearbox; Pushing Operation - Agria 5900 Bison Translation Of The Original Operating Instructions

3 Devices and Operating Elements

Gearbox

Drive control

Pushing operation

26
The agria 5900 Bison machine is equipped with
a hydrostatic traction drive.
•
Use your index finger or thumb to adjust or
change the driving speed continuously for-
ward / backward at the drive lever (B/10).
•
The O position is reached when the mark on
the drive lever is aligned with the "O" in the
pictogram, and hits the spring notch.
•
Swing the drive lever forward to increase the
driving speed continuously. Swing the drive
lever back downwards to reverse according-
ly.
•
Pushing the machine without engine propul-
sion requires the idling loop to be opened
(position "O"). Caution: There is no hy-
draulic braking effect in idling position.
•
The idling loop (A/3) sits at the front right
underneath the hood. Rotate the shift lever
to switch it.
•
Hydraulic drive is resumed when the idling
loop is closed (position "I").
•
Check the switching position before you
start work!
Pushing operation / towing up to max.
4 km/h.
Tow-start is not permitted!
Hydrostatic Implement Carrier agria 5900 Bison