Homestyles 200 -301-FB 1 80 Manual

Sofa

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Part List

For assembly see instructions in carton

home

200 -301-FB

Sofa

Base

1 pc.

Back

1 pc.

styles Customer Service: www.homestylesfurniture.com,

servicedesk@homestylesfurniture.com,

2001-302

888-680-7460

Back Cushion

2 pcs.

-FB

Table of Contents

Do you have a question about the 200 -301-FB 1 80 and is the answer not in the manual?

Page 1 200 -301-FB Sofa IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble.
Page 2 200 -30 FB Sofa IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble.
Page 3 Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the ﬂoor. Metal Slot STEP 1 Attach Base (A) to Side (C) by sliding metal slots into position. (See Figure 1) Attach Side (D) to unit by sliding metal slots into position. Figure 1 STEP 2 Attach Feet (B) to unit, then tighten.
Page 4 Assembly Instructions / 3 3 Back Cover Metal Slot STEP 3 Align the metal brackets of the Back (E) to brackets of Latch each Side (C & D) and insert at the same time. Lock Back (E) in position with latches. (See Figure 2) Attach back cover to back of unit.
Page 5 CARE INSTRUCTIONS NEVER NEVER use glass cleaners on allow liquids to remain on furniture. nished furniture. Ammonia Absorption causes parts to warp chemically attacks the nish. and split and nishes to delaminate. Do not use power tools Do not place Do not write above 8 volts to assemble.