Table of Contents
Advertisement
IMS-4000 Manual
Alarm Message Pop-Ups
While online with one or more IMS-4000 units through the ConsoleView Software, you can have
an alarm message pop up on your computer screen whenever an alarm occurs. This could be an
environmental or IP alarm on any Host or Node. You can configure this feature to display a general
message indicating the Unit and Channel names, or you can associate a custom message with each
input. The custom message can be displayed as plain text or HTML. The custom messages can be
stored either on the local workstation or a drive that is regularly mapped to the workstation.
Activating Alarm Pop-Ups
Click on File, then Options from the main menu in the ConsoleView Software. The following
screen will appear.
Within the section titled "Alarm Notification" click in the box to Enable Alarm Pop-Up
Notifications. This will activate the Alarm Message Pop-Up feature. When an alarm occurs, a
message will appear that simply displays the Unit and Channel names. If the user has permission
to acknowledge the alarm, an Alarm Acknowledgment box will also appear. A sample message is
shown below.
70
Figure 41: Options Screen
Figure 42: Simple Alarm Popup
Advertisement
Table of Contents
