Table of Contents
Advertisement
IMS-4000 Manual
Software Installation and Hardware Requirements
This section describes how to install and configure the IMS-4000 ConsoleView Software for your
enterprise.
Hardware and Software Requirements
Minimum Requirements:
Intel Pentium processor or equivalent
30 MB of free disk space
32 MB of RAM (64 MB RAM recommended)
Graphics card and monitor compatible with Microsoft Windows
Microsoft Windows
Mouse
Soundblaster-compatible sound card, microphone and speakers
Windows-compatible phone modem and/or RS-232 ports
Software Installation
The IMS-4000 ConsoleView Software setup program makes installation quick and easy. Make sure
that all Windows applications are closed before attempting to run setup.
If you encounter problems during installation, please call Sensaphone Technical Support at
610.558.2700.
Installing from the CD
1. Start Windows.
2. Insert IMS-4000 CD-ROM
3. Select Start>Run and type in D:\Setup.exe and click OK.
Note: If your CD-ROM is installed on a drive letter other than D, substitute the appropriate
letter.
4. Follow the prompts until the installation is finished.
The IMS-4000 ConsoleView Software for Windows will install to a directory named C:\Program
Files\IMS4000, unless you choose to change the directory name. The installation program will give
you three installation choices: Typical, Compact, or Custom. For new installations choose Typical.
42
95, 98, NT, 2000, or XP
®
Figure 5: Installation screen
95, 98, NT, 2000, or XP
®
Advertisement
Table of Contents
