Default Gateway - Phonetics Sensaphone IMS-4000 User Manual

Enterprise Status
Unit
IMS-4000 Monitor
NY_Node
Press any key to return to main menu
Option 2 will display the network configuration for the Host as well as web server, RAS, and two-
way email settings. A sample of Option 2 is shown below:
Network and Option Configuration
Physical Address
IP Address
Subnet Mask

Default Gateway

DNS Server
Enterprise name
Web Server
Web Server Security
Remote Access Server
RAS IP Port Address
Two-Way E-mail Responder
Microphone Listen-in
Datamodem
SNMP RO community
SNMP RW community
SNMP Agent
Allow remote configuration
Press any key to return to main menu
Option 3 will allow you to set all pertinent network settings listed under Option 2.
NOTE: You can remotely reconfigure the Host network settings using the IMS-4000
ConsoleView software if the Allow Remote Configuration option is set to Y. However, the Host
must initially be configured via the serial port before any remote configuration is possible.
Option 4 allows you to configure or reconfigure the Enterprise name.
Option 5 allows you to configure the Web server. When Web security is enabled, a Profile
Username & Password must be entered to view the web page. A sample of the Web configuration
menu is shown below:
Configure Web Server
1. Enable Web Server: Y/N
2. Enable Web Status Security: Y/N
3. Enable Web Programming option: Y/N
4. Enable Web Programming Security: Y/N
5. Return to main menu
Type IP
Host 10.1.4.10
Node 10.1.4.17
00:D0:C9:37:40:86
10.1.4.10
255.255.255.0
10.1.4.1
10.1.2.111
U.S. Widgets Inc.
Enabled
Disabled
Enabled
0.0.0.0
Enabled
Enabled
Enabled
public
private
Enabled
Disabled
Status
Ok
Ok