SubC Imaging DVRO User Manual page 60

REMOTE CONTROL
Serial Configuration - Inspection Management Software
The DVRO can also accept direct commands from leading Inspection Management Software. It will
need to be configured in advance so that it can listen for the appropriate commands via its network
ports.
Setting up the built-in Remote Control
Click the Settings tab along the top row of tabs where video feeds are selected.
The DVR Settings window will appear:
Serial Port - COMXX: A header will display a menu for each COM Port on the computer.
●
● Baud Rate: The transmission rate. If the sender and receiver have different Baud's it won't
work.
● Wait for terminator: Select this box to ignore the Master Timeout and Data Timeout and
wait until whatever string of characters is in the Terminator box to show up.
● Master timeout: Set to how many milliseconds to wait between messages coming in until
the command is finished.
● Data timeout: Set to how many milliseconds to wait before the message is considered
finished.
● DTR and RTS: Options on the serial ports.
Page 60
DVR Settings Window