Software Controls; Recording And Stills - SubC Imaging DVRO User Manual

SOFTWARE CONTROLS

Recording and Stills

1. Record
● Press the record button to start recording video footage in a new file. Press the record button
again to stop recording video footage to that file. A
area when the footage is recording.
To verify that your files are being created properly prior to recording, click the link on the lower
●
right.
2. Pause
● Press the pause button to pause the recording, the timer overlay, and recording timer.
The difference between pausing and stopping is that resuming from a pause will continue the
●
recording on the same file.
You can use the pause function to combine time-separated portions of the video feed without
●
having to record unnecessary footage or manage numerous files.
To resume recording, press the pause button again.
●
3. Take Still (frame grab)
Press the green camera button to capture a digital still from the video and save it to the stills
●
folder.
By default the stills folder will be a subfolder of the folder where your video is being created.
●
red outline will form around the viewing
Page 17
1 2 3