Scanning To A Network Folder Or Ftp Server - Epson WF-C17590 User Manual

Scanning to a Network Folder or FTP Server

Downloaded from ManualsNet.com search engine
Select any other fax settings as necessary.
• For an email contact, select the Email Address field. Use the on-screen keyboard to enter the
address and select OK.
• For a network folder or FTP location, select the Communication Mode field and select Network
Folder (SMB) or FTP. Then select the Location field, use the on-screen keyboard to enter the
location, and select OK. Enter other information if necessary.
Enter the folder path name for the Location setting in one of the following formats depending on
the Communication Mode setting you selected:
• SMB: \\host name\folder
• FTP: ftp://host name/folder name
12. Select OK.
Note: If you need to edit or delete scanning contacts, the procedures are the same as for fax contacts.
Parent topic: Setting Up and Scanning to a Network Folder or FTP Server
Related tasks
Entering Characters on the LCD Screen
Related topics
Setting Up Contacts Using the Product Control Panel
You can scan an image and save it to a network folder using your product's control panel. You can either
enter the folder path directly on the product's control panel or select a folder from the Destination tab.
Note: Make sure the date and time are set correctly before using this feature.
1. Place your original on the product for scanning.
Note: To scan a double-sided or multi-page document, place your originals in the ADF.
2. Press the home button, if necessary.
3. Select Scan.
219