Product Makes Noise, But Nothing Copies; Product Makes Noise When It Sits For A While; Originals Do Not Feed From The Automatic Document Feeder - Epson WF-C17590 User Manual

Product Makes Noise, But Nothing Copies

Product Makes Noise When It Sits for a While

Originals Do Not Feed From the Automatic Document Feeder

Downloaded from ManualsNet.com search engine
Parent topic: Solving Copying Problems
Related references
Paper Jam Problems
Related tasks
Setting User Feature Restrictions (Access Control)
If your product makes a noise, but nothing copies, try these solutions:
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• If the nozzle check page does not print, but the product's power is on, make sure your product
software is installed correctly.
• Make sure your product is level (not tilted).
Parent topic: Solving Copying Problems
Related tasks
Checking the Nozzles Using the Product Control Panel
Your product is performing routine maintenance. This is normal.
Parent topic: Solving Copying Problems
If your originals do not feed when placed in the ADF, try these solutions:
• Make sure the ADF icon lights up on the Copy, Fax, or Scan screen on the LCD screen. If not, reload
the originals.
• Make sure the size, weight, and number of your originals are supported by the ADF.
• Make sure the originals are loaded correctly.
• Make sure the document is not curled or creased.
• Try cleaning the inside of the ADF.
• Do not load originals above the arrow mark on the ADF edge guide.
Parent topic: Solving Copying Problems
370